AMD GCN 2/3 APU graphics for macOS (Stoney Ridge, Carrizo, Bristol Ridge) - Lilu plugin using Apple's Polaris drivers
UnifiedRed is in active development. Expect panics and black screens, and keep a USB stick that boots your current OpenCore EFI. It targets AMD's pre-Ryzen GCN APUs (Stoney Ridge, Carrizo, Bristol Ridge) โ it does not support Ryzen, Vega, or RDNA APUs. It requires Lilu 1.7.2 or later.
UnifiedRed brings macOS graphics to AMDโs pre-Ryzen GCN APUs by adapting Appleโs own Polaris drivers. It provides display output and Metal acceleration for integrated GPUs that macOS never supported.
Overview
APUs such as Stoney Ridge and Carrizo have no native macOS driver โ without a patch they only get the firmware framebuffer. UnifiedRed is a Lilu plugin that reuses Appleโs still-shipping Polaris stack: AMD9500Controller and AMDSupport for display, and AMDRadeonX4000 for acceleration. It is the same idea NootedRed applies to Vega iGPUs, applied to GCN 2/3 hardware.
The project was formerly named CarrizoRed and was renamed UnifiedRed on 2026-11-07 when the GCN 2 work moved in. Old links redirect, but the kext bundle and config.plist entry must be renamed if you are updating.
Supported Hardware
| APU family | Examples | PCI ID | Status |
|---|---|---|---|
| Stoney Ridge | A9-9410/9420/9425, A6-9220/9225, A4-9120, E2-9000/9010 | 1002:98E4 |
Display and Metal working on A9-9410, A9-9425, A6-9220, A6-9225, E2-9010 |
| Carrizo / Bristol Ridge | A12-9800, A10-9700, FX-9800P, A10-8700P, FX-8800P | 1002:9870, 9874โ9877 |
Code paths written, untested (no hardware) |
GCN 2 APUs (Kaveri, Kabini, Beema/Mullins) are planned but not implemented.
What Works
- Built-in panel: Recovery, the installer, and installed macOS drive the laptop or all-in-one panel through Appleโs Polaris display driver.
- Metal acceleration: WindowServer and apps render through the GPU; vibrancy, text, icons, and the Dock draw correctly.
- GPU clock scaling: The SMU clock table is used to scale from idle to the chipโs top level.
- Sleep and wake: Real S3 on tested machines, with USB keyboard wake.
- Brightness: The Displays slider and brightness keys work with
SSDT-PNLFand BrightnessKeys. - HDMI: External displays are detected at boot and on hot-plug on tested machines.
Known Limitations
- Not for Ryzen or newer APUs. Use NootedRed for Vega/RDNA iGPUs or Radeonized for Rembrandt RDNA 2 iGPUs.
- Tahoe 26 is glitchy and not recommended yet. It needs at least 1 GB of graphics memory; with the usual 512 MB carve-out, widgets and some apps draw incorrectly.
- Video decode/encode is on hold. Video plays and records in software.
- USB 3 is unusably slow on these APUs under macOS. Use FCHXHCIFix independently of UnifiedRed.
- Carrizo and Bristol Ridge are untested; reports from owners are welcome.
Requirements
- An AMD pre-Ryzen APU: Stoney Ridge, Carrizo, or Bristol Ridge.
- macOS Catalina (10.15) through Sequoia (15). Tahoe works with glitches.
- Lilu 1.7.2 or later.
- OpenCore, with the iGPU spoofed as a Polaris device.
Installation
- Install Lilu 1.7.2 or later.
- Copy
UnifiedRed.kexttoEFI/OC/Kexts/and add it toconfig.plistunderKernel โ Add, after Lilu. - Add a
DevicePropertiesentry for the iGPU withdevice-idset toEF670000(Polaris 11 / Baffin,0x67EF). The iGPU is atPci(0x1,0x0); thePciRootnumber differs between machines โ check yours withgfxutil -f VGAor an ACPI dump. - For brightness, add
SSDT-PNLF.amltoEFI/OC/ACPIand BrightnessKeys after Lilu. - For usable USB 3, add FCHXHCIFix.
- Reboot.
With the wrong PciRoot path, OpenCore silently skips the DeviceProperties entry and the accelerator never loads. ioreg -lw0 -r -c IOPCIDevice | grep '"device-id" = <ef670000>' should show the spoof after boot.
Related Kexts
- Lilu - Required dependency
- BrightnessKeys - Brightness key handling for the built-in panel
- WhateverGreen - General GPU patches and fixes
- NootedRed - AMD Vega and RDNA iGPU support (Ryzen APUs)
- Radeonized - AMD RDNA 2 integrated GPU (Rembrandt) support