WiFi & Bluetooth Setup Guide
Getting WiFi and Bluetooth working on a Hackintosh depends on your hardware. This guide covers the most common setups.
Compatible Hardware
Broadcom (Best Compatibility)
- BCM94360CD / BCM943602CDP - Native support, AirDrop/Handoff/Continuity
- BCM94352Z - Requires kexts for full functionality
- Most Fenvi cards - Broadcom-based, great compatibility
Intel (Limited)
- AX200/AX210 - Works with itlwm or AirportItlwm
- Older Intel cards - Limited support
Realtek (RTW89)
- RTL8851BE / RTL8852AE / RTL8852BE / RTL8852BTE / RTL8852CE / RTL8922AE / RTL8922DE - Works with AirportRTW or AirPort_RTW89
- RTW88 cards (RTL8723DE, RTL8812AE, RTL8814AE, RTL8821AE, RTL8821CE, RTL8822BE, RTL8822CE) - AirportRTW only
Broadcom Setup
Native Cards (BCM94360 series)
These work out of the box in most cases. Just ensure:
- No conflicting kexts are loaded
- Your SMBIOS matches a real Mac with the same card
BCM94352Z / Dell DW1560
Required kexts:
- AirportBrcmFixup
- BrcmPatchRAM3
- BrcmFirmwareData
- BrcmBluetoothInjector
Intel WiFi Setup
Use one of these approaches:
Option 1: itlwm (Stable)
- Creates an
itlwmnetwork interface - Requires HeliPort app to manage connections
- Most stable option, works well with macOS Sequoia
Option 2: AirportItlwm (Native WiFi)
- Provides native WiFi interface visible in System Settings
- Supports system WiFi menu and Control Center
- Now stable for most Intel cards on macOS Ventura and later
- May require specific version matching your macOS version
Realtek WiFi Setup
Two independent drivers support these cards:
- AirportRTW — native on macOS 10.13–14, experimental on Tahoe, and includes RTW88 cards. Requires Lilu and AMFIPass.
- AirPort_RTW89 — requires the OpenCore Legacy Patcher legacy Wi-Fi stack (IOSkywalkFamily, IO80211FamilyLegacy, AMFIPass) on every macOS version, but ships a Kext Installer and log tools. Tested on Sequoia 15 and Tahoe 26.
Both provide a native Wi-Fi interface — no companion app needed.
Bluetooth
For Bluetooth, you’ll typically need:
- BlueToolFixup - For macOS Monterey and later
- BrcmPatchRAM3 - For Broadcom cards
- IntelBluetoothFirmware - For Intel cards
macOS Sequoia (15.x) Notes
- AirportItlwm now works more reliably on Sequoia for Intel WiFi
- Some older Broadcom cards (BCM94352Z) may have reduced functionality on Sequoia
- Fenvi cards based on BCM94360CD continue to work natively
- Always use the latest versions of itlwm/AirportItlwm for Sequoia support
Troubleshooting
WiFi not detected
- Verify your card is compatible
- Check kexts are loaded in correct order
- Try different USB ports for USB WiFi adapters
AirDrop/Handoff not working
- Ensure you have a compatible Broadcom card
- Check SMBIOS settings
- Verify Bluetooth is working
Related Kexts
Advertisement
Advertisement (336×280)
Advertisement
Advertisement