Radeonized

Radeonized

by FranciumOS-org
Graphics AMD
Requires Lilu

AMD Radeon Rembrandt (RDNA 2 iGPU) graphics kext and Lilu plugin for macOS - Metal acceleration and built-in panel support

Advertisement
Advertisement
Experimental โ€” back up your EFI

Radeonized is early software (v0.1.x). Keep a USB stick that boots your current OpenCore EFI. It requires Lilu in your EFI, the laptop firmware set to iGPU-only (Eco) mode, and SIP relaxed enough to load unsigned kexts. The framebuffer kext installs to /Library/Extensions, not the EFI.

Radeonized brings native graphics to AMD Radeon Rembrandt integrated GPUs on macOS. It is a Lilu plugin that boots from the OpenCore EFI, plus a framebuffer kext that drives the laptopโ€™s built-in panel.

Overview

Rembrandt RDNA 2 iGPUs (Radeon 680M and 660M, found in Ryzen 6000 and 7035-series APUs) are not supported by macOS. Radeonized patches the AMD graphics stack so the GPU appears in System Profiler as a supported Radeon, Appleโ€™s compositor runs on the GPU, and the built-in panel works with brightness and refresh-rate control.

It is separate from NootedRed, which targets Vega and RDNA 1 integrated graphics, and from NootRX, which targets RDNA 2 dedicated GPUs.

Supported Hardware

GPU PCI ID Status
AMD Radeon 680M / 660M (Rembrandt) 1002:1681 Measured on a Ryzen 7 7735HS
AMD Radeon Rembrandt iGPU 1002:164d Matched; no machine carrying it has booted yet

What Works

  • Metal acceleration: The GPU reports as AMD Radeon 680M, Metal 3, 4 GB. Metal output is bit-exact against the reference, and Geekbench Metal lands around 22k once VRAM is raised past the 512 MB default.
  • Built-in panel: RBAMDFramebuffer owns the laptop screen, with brightness control and a refresh ladder derived from the panelโ€™s own timings.
  • Appleโ€™s compositor on the GPU, rather than through a software path.
  • OpenGL apps: OpenGL draws through a second driver image with its own tiling logic, fixing corrupted glyphs and images in Java/JavaFX apps and Steamโ€™s built-in browser.
  • USB on real interrupts, rather than polling.
  • Stock recovery and installer, so both stay usable as a way back.
  • Automatic fallback: a boot that fails to survive 60 seconds makes the next boot stock by itself.

Known Limitations

  • External displays over USB-C DisplayPort do not work yet. DP alt mode is granted and the pixel clock runs, but the PHY feeding the port stays in reset.
  • WebGL with antialiasing: multisampled colour surfaces fail to allocate, so some browser pages render white. Single-sampled content is fine.
  • Small monochrome UI glyphs can speckle in some apps.
  • Occasional stalls of a few seconds that are not yet reproducible on demand.
  • macOS versions: only Sequoia and Tahoe are claimed. Ventura and newer will load but are unmeasured.
  • On laptops where HDMI is wired to the discrete GPU, HDMI and panel brightness are mutually exclusive.

Requirements

  • A Ryzen 6000 or 7x35-series laptop with a Rembrandt iGPU, booting macOS through OpenCore.
  • macOS Sequoia (15) or Tahoe (26).
  • Lilu in the EFI.
  • The firmware set to iGPU-only (Eco) mode. On a switchable-graphics laptop the panel and backlight can be wired to the discrete GPU, and nothing on the driver side can reach the screen.
  • SIP relaxed enough to load unsigned kexts.

Installation

The app/ folder ships Radeonize, a macOS app that performs the whole install:

  1. Download the latest release from GitHub.
  2. Open Radeonize. It checks that the Mac is a Rembrandt machine on a supported macOS, downloads and verifies the release, and lists your EFI partitions.
  3. It reads the machineโ€™s own VBIOS from the ACPI tables and adds it to the plugin.
  4. It installs the plugin into EFI/OC/Kexts/ (after Lilu) and the framebuffer into /Library/Extensions/, rebuilding the auxiliary kernel collection.
  5. Reboot when it finishes. Every change is backed up to ~/Library/Application Support/Radeonize/backups/ and can be restored from there.

Manual installation

Read docs/RULES.md first.

  1. Install Lilu in your EFI.
  2. Add the plugin to OpenCore and install the framebuffer:
    sudo tools/efi.sh install
    sudo tools/fbinstall.sh
  3. Reboot after each step. Both print the UUID they installed โ€” check it against what was just built.
  4. sudo tools/efi.sh status shows what is in the EFI; tools/efi.sh restore puts back the configuration saved before a change.

The VBIOS is read from the machineโ€™s own VFCT ACPI table, because an APU has no ROM to read it from. Released builds ship without one; the app performs this step automatically. By hand:

sudo tools/efi.sh sysreport-on
sudo tools/efi.sh vbios
python3 tools/vbios_plist.py build-release/out/RembrandtGPU.kext firmware/680m-vbios.rom

If a Boot Goes Wrong

Set these as boot-args or NVRAM keys:

Setting Effect
sudo nvram rbgpu-arm=0 Acceleration off for the next boot
-rbgpustock Every feature off, plugin otherwise alive
-rbgpuoff The plugin loads and does nothing โ€” the documented rescue

Recovery always boots stock, so it stays available as a way back.

  • Lilu - Required dependency
  • NootedRed - AMD Vega and RDNA 1 iGPU support
  • NootRX - AMD RDNA 2 dedicated GPU support
  • WhateverGreen - General GPU patches and fixes

Resources